manualshive.com logo in svg

Phoenix Contact 2700290, User Manual, Page: 132 / 154

Share
Download
Phoenix Contact 2700290 User Manual Download Page 132

Smart Managed Compact Switch

156

PHOENIX CONTACT

8089_en_03

Figure 9-1

“Operating Mode” web page

Switching to “Default”

mode

When the switch is reset to “Default” mode from “PROFINET” mode, the following settings

are made:
–

LLDP remains active with the values set by default.

–

IP address assignment is set to BootP.

–

The station name for the switch does not change. If no station name has been specified,

the device type is entered.

9.2

Switch as a PROFINET device

9.2.1

Configuration in the engineering tool

9.2.1.1

Specifying the bus configuration

The switch can be operated as a PROFINET device if it is integrated under a controller in

the bus configuration in the engineering tool. A GSD file and an FDCML file for integration

can be downloaded at

www.download.phoenixcontact.com

.

It is recommended to save the new configuration after changing operating mode. Please

note that some configuration modifications only take effect after a restart.

Summary of Contents for 2700290



























































































































































Reviews:

No comments