Phoenix Contact 2700290, User Manual, Page: 33 / 154

Configuration and diagnostics
8089_en_03 PHOENIX CONTACT
33
SNMP trap
Connection test
Once the “Sending traps” function has been activated and the trap managers have been de-
fined using the IP addresses, test traps can now be sent using “Execute” to test the commu-
nication path from the switch to the trap receiver.
“Software Update” menu
This page is used to view or modify the parameters for a software update and to trigger the
update.
Figure 4-8 “Software Update” web page
A reset is not carried out automatically following a firmware update. The desired option
can be selected in WBM.
Please make sure that the “TFTP Server” service program is activated in the Factory Man-
ager toolbar.
You can monitor the download in the Factory Manager message window (25%, 50%,
75%, 100%). Always wait until all the LEDs light up after approximately two minutes and
the device is available again after booting.
It is not ensured that all existing configuration data will be retained after a firmware up-
date/downgrade. Therefore, please check the configuration settings or reset the device to
the default delivery settings.
NOTE:
A voltage failure during a firmware update results in the destruction of the firmware on the
SMN. An update via TFTP is required, see “Starting with faulty software (firmware)” on
page 107.