manualshive.com logo in svg

Phoenix Contact 2700290, User Manual, Page: 81 / 154

Share
Download
Phoenix Contact 2700290 User Manual Download Page 81

Configuration and diagnostics

8089_en_03

PHOENIX CONTACT

81

trapManagerConnection

flWorkNet

OID

1.3.6.1.4.1.4346.11.11.4

flWorkNetlfParameter

OID

1.3.6.1.4.1.4346.11.11.4.1

flWorkNetIfParamPhyAddress

flWorkNetIfParamIPAddress

flWorkNetIfParamSubnetmask

flWorkNetIfParamGwIpAddress

OID

1.3.6.1.4.1.4346.11.11.3.0.99

Description

This trap is used to test the connection between the device and trap manager.

OID

1.3.6.1.4.1.4346.11.11.4.1.1

Syntax

MacAddress

Access

Read

Description

Contains the MAC address of the switch.

OID

1.3.6.1.4.1.4346.11.11.4.1.2

Syntax

IpAddress

Access

Read and write

Description

Contains the current IP address of the SMN. Changes only take effect once the “flWor-

kNetIfParamSave” object has been executed.

The “flWorkNetIfParamAssignment” object must be set to static (1), otherwise

objects cannot be written.

OID

1.3.6.1.4.1.4346.11.11.4.1.3

Syntax

IpAddress

Access

Read and write

Description

Contains the current subnet mask of the SMN. Changes only take effect once the “flWor-

kNetIfParamSave” object has been executed.

The “flWorkNetIfParamAssignment” object must be set to static (1), otherwise

objects cannot be written.

OID

1.3.6.1.4.1.4346.11.11.4.1.4

Summary of Contents for 2700290



























































































































































Reviews:

No comments