manualshive.com logo in svg

Philips Vari-Lite VL500, Service Manual, Page: 44 / 220

Share
Download
Philips Vari-Lite VL500 Service Manual Download Page 44

VARI

❋

LITE

®

 - VL500™ L

UMINAIRE

 S

ERVICE

 M

ANUAL

2 6

21-May-2009

0 2 .9 6 8 5 .0 0 1 0  A

Lamp Replacement - Incandescent (continued)

WARNING:  

Wear cotton gloves or other covering while servicing lamp. Touching lamp 

glass with bare fingers will leave oil and may cause the lamp to explode or reduce lamp life. If 
required, use alcohol and soft, lint-free cloth to thoroughly clean glass portion of lamp.

Step

5. Remove lamp by pulling straight out of socket.

Step

6. Carefully clean reflector with soft, lint-free cloth to remove dust and other debris.

Step

7. Install lamp by pressing firmly into socket. Ensure lamp is fully seated in socket 

with base of lamp against socket base.

Step

8. Close and re-latch back of luminaire.

Step

9. Disengage service tilt lock to allow luminaire head to move freely.

Note:  

For an updated list of approved lamps for all versions of the VL500™ luminaire, 

please refer to Vari-Lite Technical Notice TN-248 (current version) on the Vari-Lite web site at 

www.vari-lite.com

.

Summary of Contents for Vari-Lite VL500





























































































































































































































Reviews:

No comments