65
4.7
System4
Monitor B Control Panel
4.7.1
Display Mode for a Duplex System4
The
Control Panel
gives you an actual layout of how the camera-
to-cameos are being displayed and the display mode currently on
your monitor A/B. In the picture shown, cameo 1 is selected and
your monitor B would be currently displaying a 4x4 mode for a
16-channel multiplexer.
Display modes that are selectable are 4x4, 12+1, 8+2, 3x3, 4+3,
quad, and full screen.
■
To select one of these Display modes, click with the graphic
with the left mouse button.
■
Also, you can select digital zoom by clicking on the left mouse
button on the digital zoom key. Whichever cameo is selected
in your display will go to full screen showing digital zoom on
that particular analog monitor, depending on which
System4
Monitor application is opened. If you are in full screen mode,
then that camera will go into
Digital Zoom
mode.
When a camera is in
Digital Zoom,
you are able to move about in that entire frame from which your camera is zoomed into. To
do this, the PTZ control section of the
Control Panel
is displayed.
■
The up, down, left, and right arrows are blackened for the
user to click on with the left mouse button. This allows
movement within that frame of the camera which is in Digital
Zoom. Once Digital Zoom is deselected, the PTZ section will
go back into it's previous state.
NOTE:
When Digital Zoom is selected on a cameo in a
multimode, the camera shown in that cameo will automatically go
to full screen.
■
To freeze a cameo or full screen display, click on the
Freeze
button with the left mouse button.
■
To sequence, click on the
Sequence
button. This button is
grayed out unless you are either in full screen or quad mode.
When selected, that monitor will go into sequence.
LTC 2650 S
YSTEM
4 M
ULTIPLEXER
GUI
M
ONITOR
A
PPLICATIONS
Monitor B Display Mode
Display Modes, Digital Zoom, Freeze, and Sequence Control
Digital Zoom Control
Summary of Contents for System4 LTC 2650/00
Page 75: ...75 ...