manualshive.com logo in svg

Philips System4 LTC 2650/00, User Manual

Share
Download
Philips System4 LTC 2650/00 User Manual Download Page 63

63

Monitor B Application for Simplex 

System4

The Simplex 

System4

Monitor B display capabilities are limited to a single analog display.  The user can assign available cameras to

the display or sequence the cameras on the display.  The user can also control the cameras and clear events.

4.6

Monitor B Application General Menu Commands

4.6.1

Options Menu

The Options Menu offers the following commands:

■

Display Camera Tool Tips

: A check option to display a pop-up

camera title when the cursor is over a cameo or camera icon.  The
default setting is checked.

■

Always on Top

: A check option to ensure the Monitor B application

stays on top of all other applications even if it does not have input
focus.  The default is checked.

■

Exit

: Exit the Monitor B application.

4.6.2

Transfer Menu

The Transfer Menu offers the following commands:

■

Upload

: If the current user has authorization, the real time information

such as Display mode, Operational mode, etc. will be uploaded from
the 

System4

hardware into the 

System4

Configure tables.

■

Select Setup

: This option selects one of the six memory setups that

you would like to use.  A dialog box with all the available configure
setups will allow you to select the active setup.  This command is
available for Installer and Administrator level users.

LTC 2650 S

YSTEM

4 M

ULTIPLEXER

 GUI

M

ONITOR

 A

PPLICATIONS

Options Menu

Transfer Menu

Select Configure Setup

Summary of Contents for System4 LTC 2650/00













































































Reviews:

No comments

Brands by name

Popular brands

Load more brands