Philips System4 LTC 2650/00, User Manual

Page: 38 / 76

38
3.3.4 On-line Menu
The On-line menu offers the following commands:
■
On-line>AutoSet>Set Sequence: This item performs the System4 menu AutoSet , Set
Sequence operation, where the multiplexer automatically sets up all the sequence lists
based on the number of cameras present in the system. It determines the number of
cameras present in the system by scanning through all video inputs, and checking for
a VIDEOLOSS. This option is grayed out unless the multiplexer is on-line.
■
On-line>AutoSet>Set Record List: This items performs the System4 menu
AutoSet , Set Record List operation, where the multiplexer automatically sets up
the cameras in the Record list based on the number of cameras present in the
system. It determines the number of cameras present in the system by scanning through all video inputs, and checking for a
VIDEOLOSS. This option is grayed out unless the multiplexer is on-line.
■
On-line>AutoSet>Set Alarm Map & Enable: This items performs the System4 menu AutoSet , Set Alarm Map operation,
where the multiplexer automatically sets up the Alarm enable list based on the number of cameras present in the system. It
determines the number of cameras present in the system by scanning through all video inputs, and checking for a
VIDEOLOSS. Unlike the current
System4 menu option, this not only sets up the alarm map, BUT it also enables this Map.
This option is grayed out unless the multiplexer is on-line.
■
On-line>AutoSet>Set Action Map & Enable: This items performs the System4 menu AutoSet , Set Action Map operation,
where the multiplexer automatically sets up all of the Action enable list and Alarm enable list based on the number of cameras
present in the system. It determines the number of cameras present in the system by scanning through all video inputs and
checking for a VIDEOLOSS. Unlike the current
System4 menu option, this not only sets up the alarm map, BUT it also
enables this Map. This option is grayed out unless the multiplexer is on-line.
■
On-line>AutoSet>Set All of the Above: This items sets up the Sequence lists , Record lists , Action map , Alarm map , and
enables the Action & Alarm maps based on the number of cameras present in the system. It determines the number of cameras
present in the system by scanning through all video inputs and checking for a VIDEOLOSS. This option is grayed out unless
the multiplexer is on-line.
■
On-line>AutoSet>Date Time: This option opens the same dialog box present in the Allegiant configuration. When it first is
opened, it will display the PC's time and date. The user can accept the PC's time and date or edit them. The data is then
downloaded to the multiplexer. This does not affect any date formatting that is configured in the multiplexer. This option is
grayed out unless the multiplexer is on-line.
■
On-line>Diagnose> Alarms: When you select this item from
the On-line menu, a dialog box will appear.
The dialog box contains a set of check boxes, one per alarm
input/channel for selection of the alarm to simulate. After
selecting the input/channels that you wish, you can select
either the Activate or Deactivate buttons to either simulate
or deactivate alarms that are present in the GUI map or
Alarm Handler. The multiplexer will act as if it had an actual
contact closure for the channels that are in alarm.
LTC 2650 S
YSTEM
4 M
ULTIPLEXER
GUI C
ONFIGURATION
On-line Menu
Diagnose Alarms Box