Philips System4 LTC 2650/00 User Manual Download Page 67

Page: 67 / 76

■

In addition, a click of the right mouse button on a camera icon that has an active event will call up the following list box:

Full Screen
Clear All
Action Clear
Alarm Clear
Video Loss Clear

■

Full Screen

: displays the camera on Monitor A in full screen mode and the Cameo Grid updates appropriately. This option is

grayed out if there is a Video Loss event for this camera. If there are no active events for this camera, all other options are
grayed out.

■

Clear All

: will clear any active events for this camera. Only those events that are currently active can be selected. All others are

grayed out.

■

Multiple Events

: can be cleared individually by selecting

Action Clear

Alarm Clear

, or

Video Loss Clear

■

Action and Alarm History Buttons

: when pressed, will display all cameras that have been previously in alarm. These cameras

will highlight blue in the

Cameras In Display

section. Once either of these two buttons have been reset, all history will be

erased until new alarms occur. For the History to work, these buttons must not be pressed until actions or alarms occur.

NOTE:

History must be enabled in the

Configuration Action and Alarm Tables

When an alarm is triggered from either motion or an alarm input, the corresponding camera or alarm icon on the map will flash.

■

Click on the

Event Handler

button in the

GUI Map

and the Event Handler will open up. From there, you can jump to the

page on your map to see where the alarm has been triggered. When double-clicking with your left mouse key on the flashing
icon (camera or alarm icon) the following box will appear.

To learn more about the

System4

Alarm Handler,

refer to the

System4

Alarm Handler User Interface

section of this user's manual.

LTC 2650 S

YSTEM

4 M

ULTIPLEXER

GUI

ONITOR

PPLICATIONS

Summary of Contents for System4 LTC 2650/00













































































Search results

Summary of Contents for System4 LTC 2650/00

Reviews:

Related manuals for System4 LTC 2650/00

Brands by name

Popular brands

Philips System4 LTC 2650/00, User Manual

Search results

Summary of Contents for System4 LTC 2650/00

Reviews:

Related manuals for System4 LTC 2650/00

Brands by name

Popular brands