PEUGEOT RIFTER Page 174 Handbook Download

Page: 174 / 260

172

Technical data

Dimensions (mm)

These dimensions have been measured on an unladen vehicle.

The vehicle is available in two lengths (Standard and Long).

The height may vary, depending on wheel diameters.

Vehicle length
Standard (L1)

Long (L2)

Overall length

4,403

4,753

Overall height

Without roof bars

1,833 to 1,837

1,836 to 1,840

With roof bars

1,874 to 1,878

1,879 to 1,882

Wheelbase

2,785

2,975

Front overhang

892

Rear overhang

726

886

Width inc. mirrors

Folded

1,921

Unfolded

2,107

Front track width

1,553

Engine technical data and

towed loads

Engines

The engine characteristics are given in the

vehicle's registration document, as well as in

sales brochures.

The maximum power corresponds to the

value type-approved on a test bed, under

conditions defined in European legislation

(Directive 1999/99/EC).

For more information, contact a PEUGEOT

dealer or a qualified workshop.

Engines and towed loads - PETROL

Vehicles fitted with the

VTi 110 BVM5

engine are not suitable for towing.

Summary of Contents for RIFTER





































































































































































































































































Search results

Summary of Contents for RIFTER

Reviews:

Related manuals for RIFTER

Brands by name

Popular brands

PEUGEOT RIFTER, Handbook

Search results

Summary of Contents for RIFTER

Reviews:

Related manuals for RIFTER

Brands by name

Popular brands