manualshive.com logo in svg

PEUGEOT RIFTER, Handbook

Share
Download
PEUGEOT RIFTER Handbook Download Page 156

154

In the event of a breakdown

4.

12 V compressor with a cartridge of sealant 

and a speed limit sticker

For temporary repair of a tyre and to adjust 

the tyre pressure.

For more information about the 

Temporary 

puncture repair kit

, refer to the corresponding 

section.

With spare wheel

5.

Wheelbrace.

For removing the wheel bolts and raising/

lowering the jack.

6.

Jack.

Used to raise the vehicle.

7.

Wheel bolt cover/wheel trim removal tool 

(depending on equipment).

If present on the vehicle, used to remove 

the wheel bolt covers on alloy wheels or the 

wheel trim on steel wheels.

8.

Socket for the “security” wheel bolts.

For adapting the wheelbrace to the special 

"security" bolts.

For more information on the 

Spare 

wheel

, please refer to the corresponding 

section.

All of these tools are specific to your 

vehicle and may vary depending on 

equipment.

Do not use them for any other purposes.

The jack must only be used to change a 

wheel with a damaged or punctured tyre.

The jack does not require any maintenance.

The jack meets European standards, as 

defined in the Machinery Directive 2006/42/

CE.

Certain parts of the jack such as the 

screw thread or the joints could cause 

injury: avoid touching them.

Carefully remove all traces of lubrication 

grease.

Temporary puncture 

repair kit

Scan the QR code on page 3 to view 

explanatory videos.

Comprising a compressor and a sealant 

cartridge, it allows the 

temporary repair

 of a 

tyre so that you can drive to the nearest garage.

It is designed to repair most punctures 

which could affect the tyre, located on 

the tyre tread or shoulder.

The vehicle's electric system allows the 

connection of the compressor for long 

enough to inflate a tyre after a puncture 

repair.

For more information on the 

Tool kit

, 

refer to the corresponding section.

Repair procedure 

Do not remove any foreign bodies (e.g. 

nail, screw) which have penetrated into 

the tyre.

►  Park the vehicle without obstructing traffic 

and apply the parking brake.

►  Follow the safety instructions (hazard 

warning lamps, warning triangle, high visibility 

Summary of Contents for RIFTER





































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands