PEUGEOT RIFTER Handbook Download

Page: 223 / 260

221

PEUGEOT Connect Nav

Media

USB port

Insert the USB memory stick into the USB

port or connect the USB device to the

USB port using a suitable cable (not supplied).

To protect the system, do not use a USB

hub.

The system builds playlists (in temporary

memory); this operation can take from a

few seconds to several minutes at the first

connection.

Reduce the number of non-music files and the

number of folders to reduce the waiting time.

Playlists are updated whenever the ignition

is switched off or a USB memory stick is

connected. The audio system memorises these

lists, which will subsequently load faster if they

have not been changed.

Auxiliary socket (AUX)

Depending on equipment

Connect a portable device (MP3 player,

etc.) to the auxiliary jack socket using an

audio cable (not supplied).

This source is only available if "Auxiliary input"

has been selected in the audio settings.

First adjust the volume on the portable device

(to a high level). Then adjust the volume of the

audio system.

Controls are managed via the portable device.

Selecting the source

Press

Radio Media

to display the main

page.

Select "

SOURCES

Select the source.

Watching a video

Depending on equipment/Depending on version/

Depending on country.

Insert a USB memory stick in the USB port.

Video control commands are accessible

only through the touch screen.

Press

Radio Media

to display the main

page.

Select "

SOURCES

Select

Video

to start the video.

To remove the USB memory stick, press

the pause button to stop the video, then

remove the memory stick.

The system can play video files in the MPEG-4

Part 2, MPEG-2, MPEG-1, H.264, H.263, VP8,

WMV and RealVideo formats.

Streaming Bluetooth

Streaming allows you to listen to the audio feed

from your smartphone.

The Bluetooth profile must be activated.

First adjust the volume on the portable device (to

a high level).

Then adjust the volume of the audio system.

If play does not start automatically, it may be

necessary to start the audio playback from the

smartphone.

Control is from the portable device or by using

the system's touch buttons.

Once connected in streaming mode, the

smartphone is considered to be a media

source.

Connecting Apple

players

Connect the Apple

player to the USB port using

a suitable cable (not supplied).

Play starts automatically.

Control is via the audio system.

The classifications available are those of

the portable device connected (artists/

albums/genres/playlists/audio books/

podcasts).

The default classification used is by artist. To

modify the classification used, return to the

first level of the menu then select the desired

classification (playlists for example) and

confirm to go down through the menu to the

desired track.

The version of software in the audio system may

not be compatible with the generation of the

Apple

player.

Summary of Contents for RIFTER





































































































































































































































































Search results

Summary of Contents for RIFTER

Reviews:

Related manuals for RIFTER

Brands by name

Popular brands

PEUGEOT RIFTER, Handbook

Search results

Summary of Contents for RIFTER

Reviews:

Related manuals for RIFTER

Brands by name

Popular brands