manualshive.com logo in svg

PEUGEOT RIFTER, Handbook

Share
Download
PEUGEOT RIFTER Handbook Download Page 63

61

Lighting and visibility

4

Lighting control stalk

Main lighting

 

 

 

 

Automatic illumination of lamps/daytime 

running lamps

Sidelamps only 

Dipped or main beam headlamps 

Operation of the selected lighting is 

confirmed by the illumination of the 

corresponding indicator lamp.

In some weather conditions (e.g. low 

temperature or humidity), the presence 

of misting on the internal surface of the glass 

of the headlamps and rear lamps is normal; it 

disappears after the lamps have been on for a 

few minutes.

Headlamp dipping

 

 

Pull the stalk to switch between dipped and main 

beam headlamps.

In "

AUTO

" and sidelamps modes, the driver can 

switch on the main beam headlamps temporarily 

("headlamp flash") by maintaining a pull on the 

stalk.

Foglamps selection ring

Rear foglamps

 

 

They operate with the sidelamps on. 

►  Rotate the ring forwards to switch them on 

and backwards to switch them off.

When the lighting is switched off automatically 

("

AUTO

" position), the foglamps and the dipped 

beam headlamps will remain on.

With front and rear foglamps

 

 

They operate with the dipped beam 

headlamps on, in manual or auto mode.

Turn and release the ring:

►  once forwards to switch on the front foglamps 

and then a second time for the rear foglamps.

►  once backwards to switch off the rear 

foglamps and then a second time for the front 

foglamps.

If the lighting is switched off automatically 

("

AUTO

" position) or the dipped beam 

headlamps are switched off manually, the 

foglamps and sidelamps will remain on.

►  Turn the ring backwards to switch the 

foglamps off; the sidelamps will then switch off.

When the lighting is left on

An audible signal when a front door is 

opened warns the driver that the vehicle's 

exterior lighting is on, with the ignition off and 

in manual lighting mode.

In this case, switching off the lighting stops 

the audible signal.

Summary of Contents for RIFTER





































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands