PEUGEOT RIFTER Handbook Download Page 163

Page: 163 / 260

161

In the event of a breakdown

Model A

Model B

Sidelamps / Daytime running lamps.

Type A

, W21/5W or LED (depending on

version)

Main beam headlamps.

Type C

, H1

Dipped beam headlamps.

Type C

, H7

Direction indicator.

Type B

, PY21W

Foglamp.

Type D

, H11

Direction indicator side repeater

Type A, WY5W-5W (amber)

– Push the repeater towards the rear and

release it.

– When refitting, engage the repeater towards

the front and then bring it back towards the rear.

Amber-coloured bulbs (direction indicators and

side repeaters) must be replaced with bulbs of

identical specification and colour.

Dipped beam headlamps

Type C, H7

► Remove the protective cover by pulling on

the tab.

► Turn the unit in relation to the support.

► Pull the bulb connector.

► Remove the bulb and replace it.

Take care to reposition the protective

cover while keeping the tab accessible.

Summary of Contents for RIFTER





































































































































































































































































Search results

Summary of Contents for RIFTER

Reviews:

Brands by name

Popular brands

PEUGEOT RIFTER, Handbook

Search results

Summary of Contents for RIFTER

Reviews:

Brands by name

Popular brands