background image

182

Bluetooth® audio system

When the radio station is displayed in the 

screen , press "

OK

" to display the 

contextual menu.

(Frequency search (RDS), DAB / FM auto 

tracking, RadioText (TXT) display, Information 

on the station, etc.)

DAB / FM station tracking

"DAB" does not have 100% coverage of 

the country.

When the digital signal is weak, "DAB / FM 

auto tracking" allows you to continue 

listening to the same station, by automatically 

switching to the corresponding analogue FM 

station (if it exists).

When the "DAB / FM auto tracking" is active, 

the DAB station will be selected automatically.

Press the 

MENU

 button. 

Select "

Multimedia

" and confirm.

 

Select "

DAB / FM auto tracking

" and 

confirm.

If "DAB / FM auto tracking" tracking is 

enabled, there is a lag of a few seconds 

when the system switches to the analogue 

FM station sometimes with a change in 

volume.

Receiving INFO messages

The INFO function gives priority to TA 

alert messages. To be active, this 

function needs good reception of a radio 

station that transmits this type of message. 

When a message is transmitted, the current 

audio source (Radio, CD, USB, etc.) is 

interrupted automatically to receive the INFO 

message. Normal play of the media 

previously playing is resumed at the end of 

the message.

Make a long press on this button to 

display the list of categories.

Select or deselect categories. 

Activate or deactivate the reception of the 

corresponding messages.

Display TEXT INFOS

Radio text is information transmitted by 

the radio station related to the station's 

current programme or song.

When the radio station is displayed in the 

screen, press 

OK

 to display the 

contextual menu.

Select "

RadioText (TXT) display

" and 

confirm 

OK

 to save.

DAB (Digital Audio 

Broadcasting) radio

Terrestrial Digital Radio

Depending on version

If the current DAB radio station is not 

available on FM, "DAB FM" is struck out.

 

 

1

Options display: if active but not available, the 

display will be struck out.

2

Display showing the name of the current 

station.

3

Preset stations, buttons 1 to 6.

Short press: select the preset radio station.

Long press: memorise a radio station.

4

Display showing the name of the “multiplex” 

service being used.

5

RadioText (TXT) display for the current radio 

station.

6

Represents the signal strength for the band 

being listened to.

When changing region, updating the list 

of preset radio stations is recommended.

 

 

Full list of radio stations and "multiplexes". 

Terrestrial digital radio

Digital radio provides a superior audio 

quality and also additional categories of 

traffic announcements (TA INFO).

The different "multiplex / ensemble” services 

offer a choice of radio stations in alphabetical 

order.

Change of band (FM1, FM2, DAB, etc.) 

Change of station within the same 

"multiplex / ensemble".

Starting of a search for the previous / next 

"multiplex / ensemble".

Long press: selection of the categories of 

news desired among Transport, News, 

Entertainment and Special Flash (available 

depending on the station).

Summary of Contents for RIFTER





































































































































































































































































Reviews: