PEUGEOT RIFTER, Handbook

Page: 46 / 260

44
Ease of use and comfort
► Fold the seat backwards to fix its rear
anchorage feet.
► Use the control 1 to lift the backrest to its
original position.
► Raise the head restraint.
Head restraint height
adjustment
► To raise it, pull it upwards as far as possible
(notch).
► To remove it, press the lug A and pull it
upwards.
► To put it back in place, engage the head
restraint rods in the openings keeping them in
line with the seat backrest.
► To lower it, press the lug A and push down on
the head restraint at the same time.
► Raise the control and slide the seat forwards
or backwards.
Table position
Placing the backrest in the table position
► Lower the head restraint as far as it will go.
► Operate control 1 to fold the backrest onto
the seat cushion.
Repositioning the backrest
► Unlock it by pulling control 1 .
► Return it to its initial position
► Check that the assembly is anchored
properly.
Fully folded position
Long
Placing the seat in the fully folded position
► Place the backrest in the table position.
► Lift the bar 2 , located behind the seat, to
release the feet of the seat from their anchorage
in the floor.
► Tilt the entire seat forwards.
► Hook the strap 3 on the row 2 head restraint
rod.
Returning the seat to the sitting position
► Fold the entire seat backwards.
► Check that the seat belt is not trapped during
the manoeuvre.
Removing the seat
► Lower the head restraint as far as it will go.
► Place the seat in the fully folded position.
► Pull on the strap 3 to open the seat
anchorages.
► While still holding the strap 3 , lift the seat.
Refitting the seat
► Pull on the strap 3 to open the seat
anchorages.
► While still holding the strap 3 , place them in
the anchorage points on the floor.
► Release the strap 3 .
► Ensure that no object or feet are obstructing
the rear anchorage points 4 and that the seat
belt is correctly positioned and available.