PEUGEOT RIFTER Page 12 Handbook Download

Page: 12 / 260

Instruments

Rev counter

Rev counter (x 1000 rpm).

Warning and indicator

lamps

Displayed as symbols, the warning and indicator

lamps inform the driver of the occurrence of a

malfunction (warning lamps) or of the operating

status of a system (operation or deactivation

indicator lamps). Certain lamps light up in two

ways (fixed or flashing) and/or in several colours.

Associated warnings

The illumination of a lamp may be accompanied

by an audible signal and/or a message displayed

in a screen.

Relating the type of alert to the operating status

of the vehicle allows you to determine whether

the situation is normal or whether a fault has

With matrix instrument panel

Cruise control or speed limiter settings.

Gear shift indicator.

Gear with an automatic gearbox.

Digital speedometer (mph or km/h) with LCD

symbols and LCD text instrument panel.

Display area with matrix instrument panel:

alert or function status message, trip

computer, digital speedometer (mph or km/h),

etc.

Service indicator, then total distance recorder

(miles or km) and trip distance recorder

(miles or km).

Display area with LCD text instrument

panel: alert or function status message, trip

computer, etc.

Engine coolant temperature gauge.

Engine oil level indicator.

Fuel gauge.

Control buttons

With LCD symbols instrument panel

Lighting dimmer.

After a long press on

SET

: change the set

time values and the units.

Reminder of servicing information or the

driving range with the SCR system and the

AdBlue

Reset the function selected (service indicator

or trip distance recorder).

After a long press: change the set time values

and the units.

With LCD text instrument panel
With matrix instrument panel

Temporary reminder of servicing information,

or reminder of the driving range with the SCR

system and the AdBlue

Depending on version: go back up a level or

cancel the current operation.

Lighting dimmer.

Depending on version: browse a menu or list,

or change a value.

Reset the trip distance recorder (long press).

Reset the service indicator.

Depending on version: enter the configuration

menu and confirm a choice (short press).

Summary of Contents for RIFTER





































































































































































































































































Search results

Summary of Contents for RIFTER

Reviews:

Related manuals for RIFTER

Brands by name

Popular brands

PEUGEOT RIFTER, Handbook

Search results

Summary of Contents for RIFTER

Reviews:

Related manuals for RIFTER

Brands by name

Popular brands