PEUGEOT RIFTER Handbook Download

Page: 173 / 260

171

In the event of a breakdown

Access to the eye

For more information on the

Tool kit

refer to the corresponding section.

With a manual gearbox, move the gear

lever into neutral.

With an automatic gearbox, place the gear

selector into position

Failure to adhere to this instruction may lead

to damage to braking system components

and the lack of braking assistance on

restarting the engine.

Towing your vehicle

► In the front bumper, slide a finger from the

centre of the cover plate to the upper corner (as

shown above) to unclip it.

► Screw the towing eye in fully.

► Install the towbar.

► Switch on the hazard warning lamps on the

towed vehicle.

► Move off gently, drive slowly and for a short

distance.

Towing another vehicle

► In the rear bumper, place the key in the notch

located under the flap.

► Turn the key and then open the flap.

► Screw the towing eye in fully.

► Install the towbar.

► Switch on the hazard warning lamps on the

towed vehicle.

► Move off gently, drive slowly and for a short

distance.

Summary of Contents for RIFTER





































































































































































































































































Search results

Summary of Contents for RIFTER

Reviews:

Related manuals for RIFTER

Brands by name

Popular brands

PEUGEOT RIFTER, Handbook

Search results

Summary of Contents for RIFTER

Reviews:

Related manuals for RIFTER

Brands by name

Popular brands