VersiStart p III
38
4. Adjust the settings as required:
Press the
ENTER/MENU
and
EXIT
buttons to
select which information to edit.
Use the and buttons to change the value.
Start/Stop Sunday
Start/Stop Disable
Start Time:
00:00
Stop Time:
00:00
5. To save changes, press the
ENTER/MENU
button. The VersiStart p III will
confirm the changes.
To cancel changes, press the
EXIT
button.
6.8 Network Address
To use the VersiStart p III on an Ethernet network, separate addresses must be
configured for:
•
IP Address
•
Gateway Address
•
Subnet Mask
To set the network addresses:
1. Press
MENU
to open the menu then select Setup Tools.
2. Scroll to Network Address and press the
ENTER/MENU
button.
3. Scroll to the required function and press the
ENTER/MENU
button.
4. The first digit of the address will be highlighted.
5. Use
EXIT
and
ENTER/MENU
to select which digit
to alter. Use and to change the value.
6. Press
ENTER/MENU
after the last digit to save the
setting.
Set IP Address
192.168.000.002
When the action has been completed, the screen will briefly display a
confirmation message, then return to the previous menu level.
NOTE
The network address can also be set using parameters 11H~11S.
NOTE
To configure the VersiStart p III for use with other communication protocols,
use parameters 11A~11G.
Summary of Contents for VersiStart p III 105
Page 108: ......
