PerkinElmer Photovac 2020, Manual

Page: 32 / 190

2020 Software Manual
30
NOTE: 2020 is not classified for use in hazardous locations with a
printer.
Computer
2020 may also be connected to a computer. The computer must be
100% compatible with an IBM PC. Use the cable kit (Part No.
MX350011) to connect 2020 to the computer.
You will also need terminal emulation software. If you are using
Microsoft® Windows™ you do not need to purchase any separate
software. If you are already using another type of communication or
terminal emulation software package, it is not necessary to purchase
separate software for 2020. See
Computer on page 90 for details.
NOTE: 2020 is not classified for use in hazardous locations with a
computer.
Battery Charging
Before beginning operation of 2020, the battery pack must be
charged. You can also remove the battery pack and replace it with a
fully charged, spare battery pack (Part No. MX350009).
NOTE: You must use the 220 V battery charger (Part No. MX396013)
in order to comply with the requirements of the applicable
Council Directives.
Removing and Replacing the Battery Pack
NOTE: Do not remove or recharge the battery pack in a hazardous
location.
To remove the battery pack
1. If the instrument has been turned on, turn it off by
pressing the ON/OFF key momentarily and then
releasing it.