PerkinElmer Photovac 2020, Manual

Page: 100 / 190

2020 Software Manual
98
Baud Rate SW1 SW2 SW3
9600 On Off On
Table 5 DIP Switch Settings for Baud Rate
4. Switch 4 sets the data bits. Off = 7 Bits. On = 8 Bits.
Set the data bits to 8.
5. Use Switches 5 and 6 to set the parity to none.
Parity SW5 SW6
None Off Off
Table 6 DIP Switch Settings for Parity
6. Switch 7 sets the Handshake mode. Off = Xon/Xoff.
On = DTR. Set the Handshake mode to Xon/Xoff.
7. Use switch 8 to set the data flow direction to serial to
parallel. Off = Serial to Parallel. On = Parallel to Serial.
8. Check your settings. It is imperative that you have the
correct settings or you will be unable to establish
communications. Your settings should match those in
Table 7 .