Perkin-Elmer MultiScope System, User Reference

Page: 17 / 142

Warnings and Safety Information
.
17
General Operating Conditions
The MultiScope System Microscope has been designed and tested in accordance
with PerkinElmer specifications and in accordance with the safety requirements of
the International Electrotechnical Commission (IEC). The MultiScope System
Microscope conforms to IEC 61010-1 (Safety requirements for electrical equipment
for measurement, control, and laboratory use) as it applies to IEC Class 1 (earthed)
appliances and therefore meets the requirements of EC Directive 2006/95/EC.
If the microscope is used in a manner not specified by the manufacturer, the
protection provided by the microscope may be impaired.
Only use the MultiScope System Microscope indoors under the following conditions:
Temperature 15 °C to 35 °C
Relative humidity 75% maximum (non-condensing)
If possible, avoid any adjustment, maintenance and repair of the opened, operating
instrument. If any adjustment, maintenance and repair of the opened instrument is
necessary, this must be done by a skilled person who is aware of the hazard
involved.
Whenever it is likely that the microscope is unsafe, make it inoperative. The
microscope may be unsafe if it:
• Shows visible damage;
•
Fails to perform the intended measurement;
• Has been subjected to prolonged storage in unfavorable conditions;
•
Has been subjected to severe transport stresses.