41
RCS-2 Climbing Device and Hydraulics
Assembly Instructions
D4 Climbing procedure
Inserting into the climbing
shoe at RCS CL
Observe Section D5 and the Instruc-
tions for Assembly and Use for Rail
Climbing System RCS CL.
Standard case:
■
Before reaching the next climbing
shoe (
5A/5B
), retract the climbing
rail extension.
■
In the event of a lateral offset, extend
the cylinders to the same height.
Warning
The moving process may create build-
ing edges between the platforms!
A fall can result in serious injury or even
death.
⇒
Guardrails should be installed prior to
climbing.
⇒
Cordon off areas of risk in advance.
⇒
Use personal protective equipment
to prevent falling from a height.
Climbing platforms individually
1. Stop approx. 2 cm in front of the
climbing shoes (
5
).
2. Press the “Operation Mode” button
(
3.17
) until the button flashes orange.
→
Single-mode operation is activated.
3. Insert the climbing rail extensions in-
dividually into the climbing shoes:
– pressing the “Cylinder Extend”
button on the keypad.
or
– pressing the “Cylinder Extend”
button on the connected remote
control.
4. Press the “Operation Mode” button
(
3.17
) until the button lights up
green.
→
Interlink-mode operation is activat-
ed.
Fig. D4.12
3.17
5A
5B
1.1
Fig. D4.11
Summary of Contents for 135413
Page 58: ...58 RCS 2 Climbing Device and Hydraulics Assembly Instructions F2 Declaration of incorporation...
Page 59: ...59 RCS 2 Climbing Device and Hydraulics Assembly Instructions F2 Declaration of incorporation...
Page 61: ...61 RCS 2 Climbing Device and Hydraulics Assembly Instructions F2 Declaration of incorporation...