38
RCS-2 Climbing Device and Hydraulics
Assembly Instructions
D4 Climbing procedure
Fig. D4.07
■
Retract the pistons of all hydraulic
cylinders (
1
).
■
Claw (
1.1
) circumvents the climbing
bolts (
9.1
), hydraulic cylinder tips
backwards.
■
Retract piston until claw on the pis-
ton engages under the climbing
bolts.
Are all claws engaged on the climbing
bolts?
Always extend and retract the climbing
devices until your limit stop is reached.
Synchronisation deviations are thus cor-
rected.
Switching off the hydraulic unit
■
As soon as the “Cylinder Extend”
and “Cylinder Retract” buttons are
no longer pressed, the hydraulic unit
goes into standby mode and the hy-
draulic unit switches off after 30 sec-
onds.
■
When the power supply is interrupt-
ed, the hydraulic unit switches off
completely.
1.1
9.1
1
Summary of Contents for 135413
Page 58: ...58 RCS 2 Climbing Device and Hydraulics Assembly Instructions F2 Declaration of incorporation...
Page 59: ...59 RCS 2 Climbing Device and Hydraulics Assembly Instructions F2 Declaration of incorporation...
Page 61: ...61 RCS 2 Climbing Device and Hydraulics Assembly Instructions F2 Declaration of incorporation...