Peri 135413, Assembly, Commissioning And Maintenance Spare Parts And Circuit Diagrams, Page: 21 / 74

21
RCS-2 Climbing Device and Hydraulics
Assembly Instructions
B1 Storage and transportation measures
Moving on the construction site
■
Keep bushing and clip of all
quick-couplers clean and fit with pro-
tection caps during transportation
(one set with 4 pieces, Item no.
125632) or couple them together.
■
Transport the hydraulic hoses and ca-
bles rolled up – do not drag along the
ground. (do not go below the mini-
mum bending radius.)
■
Transport the hydraulic cylinder only
with the piston rod in a retracted po-
sition.
■
When transporting the hydraulic unit
manually, pick it up with a scaffold
tube.
■
For transportation by crane, attach
the hydraulic unit to the attachment
points with 2-sling lifting gear.
■
For more details see the manufactur-
er’s assembly instructions.
Temporary storage on the construc-
tion site
(duration < 6 months)
■
Clean bushings and clips of all
quick-couplers and fit with protection
caps when storing, or connect to-
gether.
■
Hydraulic hoses and cables rolled up
and weather-proofed. (do not go be-
low the minimum bending radius.)
■
Store the hydraulic cylinder only with
the piston rod in a retracted position.
■
When storing, place the hydraulic cyl-
inder in its designated transport box,
see “B2 Packaging”.
■
Do not store the hydraulic unit in a
horizontal position as the oil can es-
cape.
■
Store hydraulic units in appropriate
containers, e. g. pallets, see Section
B2 “Packaging”.
■
For more details see the manufactur-
er’s assembly instructions.
Transport from and to the construc-
tion site
■
Clean dirt off the climbing devices
and hydraulic units, and dry them.
■
Clean the bushings and clips of all
quick-couplers and fit with protection
caps, or connect together.
■
Transport the hydraulic hoses and ca-
bles rolled up. (do not go below the
minimum bending radius.)
■
Fill the hydraulic cylinder and hoses
with oil.
■
Transport the hydraulic cylinder only
with the piston rod in a retracted po-
sition.
■
Place the hydraulic cylinder and
pump in the designated means of
transport, see “B2 Packaging”, and
secure them.
■
Do not transport the hydraulic unit in
a horizontal position.
■
When moving transport crates with
the crane, use only suitable lifting
slings that are wrapped around the
underside.
■
For more details see the manufactur-
er’s assembly instructions.
Longer storage periods
■
Do not drain the hydraulic oil during
downtime.
■
Protect connections against corro-
sion using a suitable preserving
agent. Close all openings so they are
airtight.
■
For more details see the manufactur-
er’s assembly instructions.
■
Store hydraulic hoses and cables
rolled up, weather-proofed and in the
dark. (do not go below the minimum
bending radius.)