31
RCS-2 Climbing Device and Hydraulics
Assembly Instructions
D2 Installation of Climbing Device-2 RCS 50
Connecting hydraulic hoses
■
The quick-coupler connections on the
pump are clearly marked.
■
Refer to the manufacturer’s assem-
bly instructions for the connection to
the pump.
■
Refer to the hydraulic connection dia-
gram in the assembly plans.
■
If problems occur during connection,
see Section D7 “Remedial measures
for malfunctions”.
Quick-couplers consist of:
2.1
Hydraulic Quick-coupler (bushing)
Item no. 110822/128993
2.2
Hydraulic Quick-coupler (clip) Item
no. 110823/128992
2.3
Retaining ring (bushing)
Assembly
1. Clean clip (
2.2
) and bushing (
2.1
) be-
fore coupling.
2. Push the clip (
2.2
) as far as possible
into the bushing until the retaining
ring (
2.3
) engages.
3. Turn retaining ring with a quarter-turn
(right or left) to secure it.
→
Accidental disconnection is thus
prevented.
4. Arrange the hoses so they do not
pose a safety risk, and secure their
position, e.g. with cable ties.
Fig. D2.03
Fig.D2.04
2.1
2.3
2.2
2a – 2h
Summary of Contents for 135413
Page 58: ...58 RCS 2 Climbing Device and Hydraulics Assembly Instructions F2 Declaration of incorporation...
Page 59: ...59 RCS 2 Climbing Device and Hydraulics Assembly Instructions F2 Declaration of incorporation...
Page 61: ...61 RCS 2 Climbing Device and Hydraulics Assembly Instructions F2 Declaration of incorporation...