Peri 135413, Assembly, Commissioning And Maintenance Spare Parts And Circuit Diagrams, Page: 34 / 74

34
RCS-2 Climbing Device and Hydraulics
Assembly Instructions
D3 Preparation prior to climbing
Warning
The moving process may create build-
ing edges between the platforms!
A fall can result in serious injury or even
death.
⇒
Guardrails should be installed prior to
climbing.
⇒
Cordon off areas of risk in advance.
⇒
Use personal protective equipment
to prevent falling from a height.
Warning
Body parts may become trapped be-
tween climbing rails and climbing
shoes, between the climbing device
and climbing rails or between building
sections (openings, projections) and
the climbing system!
This can result in serious injuries.
⇒
Do not hold the climbing shoe and
climbing rails when the climbing unit
is being moved.
⇒
Keep away from shearing edges
(wall openings, projections etc.).
■
Only use serviced and tested materi-
al.
■
If necessary, refer to and carry out
the hydraulic system checks in the
manufacturer’s assembly instruc-
tions.
■
Check hydraulic hoses and replace if
necessary.
■
Carefully ventilate the hydraulic cylin-
der and hoses before use, see Sec-
tion D7 “Remedial measures for mal-
functions”.
■
Check fluid level in the oil container
and top up, if necessary.
■
Unravel any loops and twists in the
hydraulic hoses and cables.
■
Check whether hydraulic hoses could
become trapped.
■
Check the data and power connec-
tion.
■
Close unused connections with mat-
ing plugs.
■
Turn on the power to the system.
■
Check the rotary field and adjust if
necessary.
■
Check the temperature of the oil and
bring it to the specified temperature
by flushing, if necessary. (For a cold
start, see the manufacturer’s operat-
ing instructions)
■
Listen out for any pump noises after
starting up.
■
Check components and connections
for leaks.
■
Lubricate Climbing Rails RCS.
■
Check whether the platforms in the
area of the climbing rails collide with
the quick-couplers or hydraulic hoses
during climbing.
Carry out the climbing procedure from
the planned position.