Commands
2014-
02
63
configuration store (CS)
Command:
Response:
The configuration store (CS) command allows you to store the last command sent to the R/W
head in the non-volatile memory of the IDENTControl. The R/W head executes the command
automatically again if the power supply is interrupted or the IDENTControl is reset.
<Mode>='1' activates the mode.
<Mode>='0' deactivates the mode.
Configuration store
is deactivated by default.
Byte
Contents
Bit no.
7
6
5
4
3
2
1
0
Byte 0
1)
Telegram length, high byte
0
0
0
0
0
0
0
0
Byte 1
1)
Telegram length, low byte
0
0
0
0
0
1
0
1
Byte 2
Command code (17h)
0
0
0
1
0
1
1
1
Byte 3
Reserved/Ident channel/Toggle
bit
-
-
-
-
<Channel>
<T>
Byte 4
Mode
0
0
0
0
0
0
0
<M>
1)
This byte is only used with the TCP/IP and MODBUS TCP/IP protocol.
Byte
Contents
Bit no.
7
6
5
4
3
2
1
0
Byte 0
1)
Telegram length, high byte
0
0
0
0
0
0
0
0
Byte 1
1)
Telegram length, low byte
0
0
0
0
0
1
0
1
Byte 2
Command code (17h)
0
0
0
1
0
1
1
1
Byte 3
Reserved/Ident channel/Toggle
bit
-
-
-
-
<Channel>
<T>
Byte 4
Status
<Status>
Byte 5
Reply counter
<ReplyCounter>
1)
This byte is only used with the TCP/IP and MODBUS TCP/IP protocol.
