P
P
E
E
S
S
1
1
9
9
0
0
0
0
G
G
i
i
G
G
S
S
M
M
R
R
e
e
p
p
e
e
a
a
t
t
e
e
r
r
PES1900NR Operations Manual
Chapter 5. Installing the Growth Cabinet — 67
Step 5 – Turn Off Power and Exit RepeaterNet
Step 6 – Connect the Second Channel Cabinet
Growth Accessory Kit: RF/Connect Cable and Power Cable
The Growth Accessory Kit contains the items described in the following sections, for the RF/ Connect
Cable and for the Power Cable.
RF/Connect Cable
•
The following items are part of the RF/Connect Cable assembly.
•
Two 1-inch Liquidtight flexible conduit 90
o
connectors, consisting of the components shown in
Figure 36 and Figure 37.
•
One ribbon cable, 26 AWG, 10 Conductor.
•
Four RF cables, as shown in Figure 38.
•
Two Liquidtight Flexible Conduit cables, 1 inch.
One conduit assembly is for mounting the second channel horizontally. In this cable, the RF
and Ribbon cables are pre-threaded through the flexible conduit. [
For Horizontal Mount Only
]
A second conduit is for mounting the second channel vertically. This conduit is shipped
without threaded cables. If used, the cables are taken from the horizontal conduit assembly
and inserted into the vertical conduit assembly. [
For Vertical Mount Only
]
NOTE: Check the label on the conduit cable, to determine which cable is correct for the
repeater application
Figure 36 Liquidtight 1-inch Connector Parts, Assembled