P
P
E
E
S
S
1
1
9
9
0
0
0
0
G
G
i
i
G
G
S
S
M
M
R
R
e
e
p
p
e
e
a
a
t
t
e
e
r
r
PES1900NR Operations Manual
Chapter 9. Configuring the Repeater — 163
To record system data:
1. Type the required information in each data field:
•
System (Repeater) Name, up to 12 characters (
required
). During automatic reporting,
the repeater name displays in the title bar of the Main Control screen, identifying the
selected repeater.
•
Site Information, Field 1, up to 14 characters. Typically, identifies the cell phone
network (
optional
).
•
Site Information, Field 2, up to 14 characters. Typically, identifies the repeater location
(
optional
).
•
Site Phone Number of the repeater, up to 12 characters (optional).
2. Click
the
Apply
or
OK
button.
•
The
Apply
button sets the system properties, and keeps the System Properties screen
open.
•
The
OK
button sets the system properties, and closes the System Properties screen.
System Inventory Tab
The System Inventory tab (see
Figure 161) displays information about
the repeater to which the PC or laptop is
connected.
After you successfully login, RepeaterNet
reads this information directly from the
repeater.
NOTE:
This data cannot be edited
except by the factory.
Table 43 summarizes the data displayed
in the information-only fields of this tab.
Table 43 System Inventory Fields Descriptions
Field Name
Description
Assembly Part Number
The part number of the repeater (for example, 090-3600-03).
Serial Number
The 9-digit serial number of the repeater.
Date Code
The date when the repeater was built.
Hardware Revision
The repeater hardware revision (such as Rev. A).
Boot Code Version
The version number of the boot code installed in the repeater.
Installed Options
Optional internal equipment in the repeater (such as a cell phone).
Firmware Version
The version number of the firmware installed in the repeater.
Figure 161 System Properties Screen,
System Inventory Tab