PDL D3-2.5, Instruction Manual, Page: 9 / 113

Microdrive Series Instruction Manual
4201-109 Rev I
4201-003 Rev
A
Page 9 of 12
Contents
MICRODRIVE-3 (UD3) SPECIFICATIONS 13
MICRODRIVE-I (UDI) SPECIFICATIONS 14
PART 1 THE STANDARD MICRODRIVE 20
1.1 APPLICATION RECOMMENDATIONS 20
1.2 INSTALLATION 20
1.2.1 Environmental Considerations 20
1.2.2 Mounting the Microdrive 21
1.2.3 Connecting the Microdrive 21
1.2.4 Large Frame-Size Motor Considerations 21
1.3 THE CONTROL PANEL 28
1.3.1 The LED Indicators 28
1.3.2 Use of the Control Panel 28
1.3.3 Screen Organisation 28
1.4 THE STANDARD CONFIGURATION 29
1.4.1 Standard control Terminal Configuration 29
1.4.2 Standard Screens (Short Menus) 29
1.5 COMMISSIONING THE MICRODRIVE 33
1.6 MAINTENANCE 35
1.7 SERVICE 35
1.7.2 RFI Filtering 35
1.7.3 Screen Fault Messages 36
1.7.4 Use Of The LED Indicators 37
1.7.5 Fuse Failure 38
1.7.6 Replacing The Control PCB 39
PART 2 THE FULL FEATURES OF THE MICRODRIVE 40
2.1 INTRODUCTION TO THE FULL FEATURES OF THE MICRODRIVE 40
2.2 CONTROL INPUT/OUTPUT FUNCTIONAL DESCRIPTION AND SPECIFICATION 40
2.2.1 Common Point Isolation 40
2.2.2 INPUTS 40
2.2.3 OUTPUTS 40
2.3 SUMMARY OF THE FULL SCREEN CONTROLS 47
2.4 Detail of the Full Screen Controls 47
APPENDIX 1A: COMMISSIONING CONFIGURATION RECORD – SHORT MENU 91
APPENDIX 1B: COMMISSIONING CONFIGURATION RECORD – FULL MENU 92
APPENDIX 1C: COMMISSIONING WIRING CONFIGURATION RECORD 93
APPENDIX 2: MICRODRIVE-3 (UD3) SPARES LISTS 94
APPENDIX 2: MICRODRIVE-I (UDI) SPARES LISTS 95