Manual
8
4.2
Application
The Shaft alignment tool PCE-TU 3 was designed to check and optimize the shaft alignment between
machines. In order to do so, the relative position of two coupled machines (as for example a motor and a
pump) need to be changed, in order to make sure, that the centre lines of the shaft need to be concentric
during normal operation.
4.2.1
CE-Conformity
The Shaft alignment tool is conforming to the following CE requirements:
2006/95/EC, EN 61010-1:2001, EN 60825-1:2007, 2004/108/EC, EN 61326-1:2006, EN 61326-2-2:2006,
EN 55011:2009+A1
4.3
Delivery content
1 x PCE-TU 3 display unit, 2 x probes, 2 x mounting sets for the probes, 1 x measurement tape
,
1 x battery charger, 1 x connection cable, 1 x software, 1 x USB-cable, 1 x manual, 1 x carrying case
