Manual
75
8.3.4
Screen overview
8.3.5
Splice explanation
If a measured object is longer than the effective length of the laser system (10 m between the sensors ), it
can be divided into parts (splices) and measured that way. A part can consist of 3 up to 300 single
measurement points where parts overlap in 2 up to 8 points (end of the previous part with the beginning
of the current part). These overlaps are necessary to carry out a straightness measurement of the whole
object correctly. If the effective length of the laser is longer than the measured object, there is no need to
use parts (splices).
Overlap point
Currently selected
distance
Selected and next
measurement number
Number of the
measurement points in
the part (Splice)
Same-distances
checkbox
Value of the current
distance
Current number of the
part and / total number of
the parts (only visible, if
there are at least two
parts)
Number of the overlap points (only
visible, if there are at least two parts
Start new
measurement
process (all data will
be deleted)
