Manual
40
7.3
Soft Foot Measurement
What should be noted in this window
Shortcuts in this window
The machine dimensions should be entered first
(go to the according menu item)
Start the Soft Foot Measurement.
Rotate the sensors to the 12 o’clock
position and adjust the laser until it
aims the target plate S and M in the
middle.
Functions in this window
Restart the Soft Foot Measurement
-
Perform Soft Foot Measurements for all
machine feet
Save results to a file (see
chapter 10
“Handling of the Data Dialogue
window“
)
Firstly enter the machine dimensions (just as described with the horizontal alignment) or skip the process
by pressing
and go to the sensor aiming screen.
If the laser beams are aligned and you leave the sensor aiming screen, you get to the Soft Foot
Measurement screen.
Now go through the following steps for every single machine base:
-
Loosen the mounting (placed on the red square) of the required machine base, wait for 5
seconds and press
to store the value. Having done that, you need to remount the machine
base and press
, to continue with the next base.
