Manual
52
7.7.4
Configuration process
Enter the amount of measurement points (positions) by pressing
and then enter a value (between 2
and 300). If the measurement points are arranged in the same distance to one and another, press
and make sure that the checkbox for “same distance” is activated. Press
and enter the distance. If
the points are arranged in different distances to each other, use
and
, to select the required point
and press
, to enter the distance to the next point. Repeat the process, until all distances are entered.
To change parameters, press
. The parameter screen will appear.
To activate or deactivate the manual data entry, press
.
To activate or deactivate the manual angle entry, press
.
To switch between measurement units, press
.
To perform averaging, press
, enter the sample number and confirm by pressing
.
To save and exit the parameter screen, press
.
7.7.5
Screen overview
Amount of the
current
measurement
point
Current distance
Number of
measurement
points
Distance between
point 1 and point 2
Distance between
point 2 and point 3
(selected)
Direction of the
laser beam
(transmitter)
