Serial Interface
153
Model 3086 G.SHDSL Integrated Access Device User Guide
E • Frame Relay to ATM Internetworking
Function:
•
When the unit is running in internal clock mode the setting of txSamplePoint will notify the system which
clock to use to sample the in coming data. Some systems require that the data be sampled on one clock or
another. This is also useful when tail circuits are being created.
•
When running in the external clock mode this should be set to ExtClk.
Web Interface
The following screen capture show the variables available to configure the serial interface through the web.
CLI Configuration
The serial interface can be configured through the CLI just as any other set of variables. The configuration vari-
ables are display by typing the command serial ?. There are two sub screens that are available to help configure
the system. The two commands with their responses are shown below:
Serial Show
Shows the current configuration on the serial interface.
--> serial show
Clock Source : internal
Intf Speed : 512
Tx Sample Point : txclk
Tx Clk Inv : normal
Rx Clk Inv : normal
Serial Help
Describes each of the Serial commands that are available
--> serial help
Serial Interface Help Screen
>serial show:
> Show the current configuration of the
> serial interface
>serial help:
> Show this help screen
>serial clock:
> Defines the clock mode or source of timing
> for the serial interface.