Using the 3086 in Routed or Bridged applications
59
Model 3086 G.SHDSL Integrated Access Device User Guide
4 • Basic Application Configurations
Click on
G.SHDSL
in the
Configuration Menu > Configuration >
verify that Terminal Type is remote and Interface Type
is “hdlc.” If changed, then click on
Configure
.
Click on
Action
> Select
deactivate
for Action > Click on the
Action
button.
2. On the Menu, go to
Configuration
, then to
WAN Connections
.
Delete both default WAN services already defined.
Click on
Create a new service
in the main window, select
PPPoH_Routed
and click on the
Configure
button.
In the Description field, enter the description you wish. In this example, it is called PPPoH Routed.
Description:PPPoH Routed
– Interface:1
– WAN IP address: 192.168.164.3
– LLC Header Mode:off
– HDLC Header Mode:ON
– No authentication
– Username:[blank]
– Password:[blank]
Click on
Configure
.
3. Go to
Configuration Menu > Configuration > WAN connections > Edit (for PPPoH Routed service) > Edit ‘IP Interface’ > Ipaddr:
[enter
the WAN IP Address, in this example = 192.168.164.3] > Click on
Change
.
4.
Configuration Menu > Configuration > IP Routes
> Click on
Create new Ip V4 Route
> Create the gateway to the remote
3086 by entering the WAN IP address of the remote 3086, in this example, enter 192.168.164.2 in the
Gateway field > OK
The other fields should be:
– Destination:0.0.0.0
– Gateway:192.168.164.2 [already changed in the first part of step 5).]
– Mask:0.0.0.0
