3 • Quick Start Installation
Model 3086 G.SHDSL Integrated Access Device User Guide
32
Hardware installation
IP Interfaces:
ID | Name | IP Address | DHCP | Transport
-------|---------------|------------------|-------------|------------------
1 | ip1 | 192.168.200.10 | disabled | <bridge>
---------------------------------------------------------------------------
→
ip set interface ip1 ipaddress 192.168.100.2 255.255.255.0 <enter>
[Sets the new IP address which you have selected.
The IP address in this example is for illustrative purposes only.]
→
ip list interfaces <enter>
[To see if the change in IP address is correct]
→
system config save <enter>
[To save the new IP address in flash memory.]
Wait for “configuration saved” message…
Saving configuration
→
Configuration saved.
<enter>
→
The IP address has now been successfully changed.
Web Operation and Configuration
Now that the IP address has been configured for your application, you can complete the configuration using
any standard web browser.
PC Configuration
In order to connect the PC to the Ethernet LAN to communicate with the Model 3086, the PC’s IP address
should be on the same subnet as the modem.
Connect a straight-through Ethernet cable between the PC’s NIC or PCMCIA Ethernet card and an Ethernet
hub or switch.
Web Browser
Do the following:
1. Launch a standard web browser such as Netscape Communicator or Internet Explorer (IE).
2. Enter the 3086’s IP address into the URL or Address field of the browser.
