Introduction
119
Model 3086 G.SHDSL Integrated Access Device User Guide
7 • NAT (Network Address Translation)
Global address pool and reserved map
1. Click on
Advanced NAT Configuration…
on the web page, “Security Interface Configuration.”
2. Click on the hyperlink
Add Global Address Pool
. The global IP addresses need to be created
and put into the Global Address Pool.
3. Set the parameters to the following values:
– Interface Type:internal
– Use Subnet Configuration:Use IP Address Range
– IP Address:100.100.100.101
– Subnet Mask/IP Address 2:100.100.100.102
Click on
Add Global Address Pool
.
4. Next, create a reserved mapping between a global IP address from the global pool and an internal PC’s IP
address (in this example, 10.1.1.2)
5. Click on
Add Reserved Mapping…
