DSLAM Connections with remote CPE units
65
Model 3086 G.SHDSL Integrated Access Device User Guide
4 • Basic Application Configurations
Model 3086 (Central) Configuration Steps (PPPoH Bridged)
From the command line interface (CLI) via the RS-232 control port,
→
ip list interfaces
One IP interface is called ip1 with an IP address of 192.168.1.1
Change the IP address so it is in the same subnet as both PCs. For example, to 192.168.100.3
→
ip set interface ip1 ipaddress 192.168.100.3 255.255.255.0
1. Now you can bring up the web-page management system on your browser by entering the IP address of
the 3086.
2. On the Menu, go to Configuration, then to WAN Connections. Delete the factory default WAN services
already defined.
Click on
Create a new service
in the main window, select
PPPoH_Bridged
and click on the
Configure
button.
In the Description field, enter the description you wish. In this example, it is called PPPoH Bridged.
– Interface = 1
– LLC header mode = dialout
– LLC header mode = off
– HDLC header mode = on
– No authenticaion
– Leave User name and Password blank.
Click on
Apply
.
3. Go to G.SHDSL in the Configuration Menu, then the submenu Configuration.
Leave Terminal Type as Central.
Change Interface Type to hdlc. Click on the Configure button.
In the Action submenu under G.SHDSL, change Action to Deactivate, then click on
Action
.
Return to Action, select Start and click on
Action
.
