A • Specifications
Model 3086 G.SHDSL Integrated Access Device User Guide
132
General Characteristics
General Characteristics
•
Compact low-cost plug and play IAD
•
10/100 Ethernet
•
Unlimited host support.
•
Comprehensive hardware diagnostics, works with any operating system, easy maintenance and effortless
installation.
•
Plug-and-Play operation for fast and seamless turn-up with pre-configured WAN and LAN options.
•
Built-in web configuration.
•
Setup allows for standard IP address and unique method for entering an IP address and mask WITHOUT
use of a console connection. Default IP address of 192.168.1.1/24.
•
Simple software upgrade using FTP into FLASH memory.
•
Eight front panel LEDs indicate Power, DSL WAN, Ethernet LAN speed and status.
•
Convenient and standard RJ connectors for Ethernet, Line, and Console.
•
Field Factory Default Option.
•
Standard 1 year warranty.
G.SHDSL Characteristics
•
2.3 mbps speed (Model 3086) over 2 wire.
•
DTE Rates 144Kbps to 2.32 Mbps operation. With nx64 with n=1 support.
•
Distance from 24,900’ at 144kbps (192kbps Line rate) to 10,200 at 2.3 mbps on 26 AWG (.4mm) wire
•
Annex A (ANSI), Annex B (ETSI) PSD selection.
•
2 wire or 4 wire support (4-wire support to be keyed) for multiple line codes per ITU G.991.2 and ETSI TS
101524 with G.994.1 Handshake.
•
CO and CP modes to be supported
•
TC-PAM based DSL modulations.
•
EOC Management channel for remote end-to-end management.
Ethernet
•
Auto-sensing Full-Duplex 10Base-T/100Base-TX Ethernet.
•
Standard RJ-45 and built-in MDI-X cross-over switch.
•
IEEE 8021.d transparent learning bridge up to 1,024 addresses and Spanning Tree.
•
8 IP address/subnets on Ethernet interface.
Sync Serial Interface
•
Selectable ITU X.21/V.35 Interface
