Managing H.110 Slots
82
FS6300 NMS Administrator’s Reference Guide
4 • Configuring Maps
Viewing H.110 Time Slot Utilization
You can view the utilization of H.110 time slots from the H.110 SlotView or the H.110 Port Utilization links
in the Map Provisioning window (
Map Provisioning > Create and Manage DS0 Maps
).
The
H.110 SlotView
window shows information about time slots that are one-sided (Tx or Rx) or used. One-
sided (Tx/Rx) slots have partial or inter-card maps to unsupported cards. Used slots have inter-card maps to
FS6300-supported cards. The table also shows in-band slots and detected overlaps.
The
H.110 Port Utilization
window shows how many time slots are being used on all the ports in a chassis.
Viewing H.110 Time Slots through H.110 SlotView
To view H.110 time slots through H.110 SlotView:
1.
Click on
H.110 SlotView
in the menu tree of the Map Provisioning window.
Figure 68. H.110 SlotView
2.
Select the
Geographic Area Node
and
Chassis
that you want view in the corresponding
drop-down
menus.
3.
Used Time Slots
will be highlighted in green in the table.
Unused Time Slots
will be highlighted in gray.
The key for all highlighted codes for times slots is at the top of the window.
The blue text in the lower-left corner of the window shows the number of
Total Time Slots Used by DS0
.