Using Scripts for System Tasks
28
FS6300 NMS Administrator’s Reference Guide
1 • Managing System Operations
Setting the factory default configuration
To set the factory default configuration for a device:
1.
In the main menu tree under
Network Maps
, navigate to the
Chassis
or
Card/Slot.
2.
Right-click on the card’s icon in the main window and select
Operator Action
. The
Reset Options
win-
dow appears. It shows the card model, IP address, and software revision of the card.
Figure 12. Set Factory Default Configuration
3.
Select
Set Factory Default Configuration
from the menu tree in the Reset Options window.
4.
Click the
Set Factory Default Configuration
button.
5.
Click the
Hard Reset
button.
Using Scripts for System Tasks
This section provides instructions for performing system tasks through scripts and CLI commands.
•
Backup the database and logs:
The NMS package includes a shell script for backing up the database con-
tents and logs directory to the server. Refer to
“Executing the script to backup the database and logs direc-
tory”
on page 29.
•
Migrate the database:
The NMS package includes a shell script for using the current development build on
an earlier database. Refer to
“Executing the script to migrate the database”
on page 29.
•
Backup card configurations:
The NMS package includes a shell script for using the current development
build on an earlier database. This section explains how to set up the system to automatically save card con-
figurations. Refer to
“Executing the script to back up card configurations”
on page 29.
The
Hard Reset
process will reset ALL of the system’s values to
the original factory settings. After resetting these values, the sys-
tem will continue to function the same until the system is reboo-
ted.
IMPORTANT
