Managing Maps
76
FS6300 NMS Administrator’s Reference Guide
4 • Configuring Maps
5.
All Port Types discovered on the selected Source and Destination cards are listed in the
Port Type
drop-
down menu. Select the
Source Port Type
and
Destination Port Type
.
6.
Select
Ports
on the source and destination cards.
Use the orange square icon
to view available ports. A pop-up window will display. If you select
T1-E1
,
as the
Port Type
, the port number that has a pre-defined trunk on the selected card is excluded from the
selection list.
7.
Enter the
Time Slot range
on
Source Port
followed by
Time Slot range
on
Destination Port
.
8.
(optional) Enter a
Circuit ID
(Description) if needed. The same description is assigned to all of the cards
you are mapping.
9.
Click
Process
to preview the map. The FS6300 will display the number of hops between the source and
destination chassis.
10.
Click
View Maps
to see details of the new end-to-end map.
11.
Click
Define
to save the map to the card configuration. A confirmation message will display if the config-
uration is successful.
Removing Maps
To delete maps between different elements (GA, NN, and CH):
1.
Click on
Map Provisioning > Create and Manage DS0 Maps
from the top of the screen. The FS6300
Map Provisioning window displays.
2.
Click on
View-Delete Maps
in the menu tree of the Map Provisioning window.
Figure 63. Map Provisioning > View-Delete Maps