![background image](http://html1.mh-extra.com/html/patton-electronics/foresight-6300-nms/foresight-6300-nms_administrators-reference-manual_4040070156.webp)
Rebuilding the NMS Server
156
FS6300 NMS Administrator’s Reference Guide
A • Recovering the NMS Server from Disk
Figure 126. Rebuild Progress
3.
After the rebuild process reaches 100%, leave the system running and pull out the “
RMA recovery drive
”
from the NMS server. Label the drive as “
reference for server 2
”.
4.
Insert the “
system1 spare
” drive into the empty drive bay. The rebuild process will start again.
5.
While system 1 is performing the rebuild process, repeat the above process to rebuild server 2.
6.
When the re-build process finishes on both servers, reboot the servers. Remember to provision the IP
address and host files in FC6.
At this point, the NMS servers are restored and ready for normal operation.