![background image](http://html1.mh-extra.com/html/parker/vix250cm/vix250cm_user-manual_755859167.webp)
6. COMMAND REFERENCE
159
PS
Pause
Syntax
Units
Range of ‘n’
Default
See also
aPS
-
-
-
C
Description
The PS (pause) command causes immediate command execution to cease
until a C (continue) command is issued. The command is useful as a debug
aid when testing small trial code blocks.
The PS command cannot be used whilst running a program.
Properties
Immediate or buffered, can’t be used in labelled block, not saved by SV
Example
0PS
;global pause
1D4000
;setup axis 1
1V5
; .
1A50
; .
2D8000
;setup axis 2
2V10
; .
2A100
; .
0G
;global GO
0C
;global continue
Note
If the input command buffer is filled during a pause *E will be reported
(assuming EX is set to speak whenever), and the status LED will continually
flash red then green. To clear this condition cycle the power.
R
Report system parameter
Syntax
Units
Range of ‘n’
Default
See also
aR(system_variable)
-
-
-
W
Description
The R command allows the user to read the specified system variable.
Properties
Immediate or buffered, can be used in labelled block, not saved by SV
Note: aR(RB) is immediate only
Example
2R(AO)
;report the current value of variable AO
The response could be .................................................... *1500
Summary of Contents for ViX250CM
