![background image](http://html1.mh-extra.com/html/parker/vix250cm/vix250cm_user-manual_755859132.webp)
124 VIX IM MICROSTEPPER INDEXER DRIVE USER GUIDE
D
Distance
Syntax
Units
Range of ‘n’
Default
See also
aDn
See SCALE
-2,147,483,647
to 2,147,483,647
-
M SCALE
Description
The D command will set or report the programmed move distance. The
value programmed is only used for preset moves. In MC (Move Continuous),
the direction is observed.
Properties
Immediate or buffered, can be used in labelled block, saved by SV
Example
To set the move distance of axis 2 to 15000 steps type .. 2D15000
To report the current programmed move distance of
axis 2, type ....................................................................... 2D
The controller responds with ............................................ *15000
If a value entered is out of range *E will be reported and the current value will
not be altered.
Distance reports the current direction as influenced by the H command in MI
(Mode Incremental) only. For example:
1MI
;mode incremental
1D4000
;set distance to 4000 steps
1D
;report distance
*4000
;value reported
1H-
;change direction
1D
;report distance
*-4000
;value reported
Summary of Contents for ViX250CM
