![background image](http://html1.mh-extra.com/html/parker/vix250cm/vix250cm_user-manual_755859204.webp)
196 VIX IM MICROSTEPPER INDEXER DRIVE USER GUIDE
Indexer Specification
Parameter
Value
Command Interface
Position range
+/- 2,147,483,647 steps
Velocity range
0.001 to 50 revs/sec
Acceleration/deceleration range
0.1 to 99999.99 rev/sec
2
Positioning modes
Incremental, absolute, registration,
continuous run
Communication
Data format
8 data bits, 1 start bit, 1 stop bit, no parity,
optional echoback, Xon/Xoff supported
Baud rate
9600 / 19200
Address setting range
1 -255 by software
RS232 connection
2 wire plus ground
Digital Inputs
User programmable inputs
5
Dedicated inputs
Home, + limit, - limit, registration, stop
Input levels (24V)
Logic high >14V, logic low < 4V
Input levels (5V)
Logic high >3.5V, logic low < 1V
Input impedance
4K7
Digital Outputs
User-programmable outputs
3
Output levels
output high
output low
+22V +10% -15% of supply
0.5V max (saturation of lower NPN transistor)
Output current rating
50mA maximum per output source
50mA per output sink
Table 8-2. Indexer Specification
Summary of Contents for ViX250CM
