![background image](http://html1.mh-extra.com/html/parker/vix250cm/vix250cm_user-manual_755859147.webp)
6. COMMAND REFERENCE
139
IF
Test condition
Syntax
aIF(system_variable,relation,value)
Description
The IF command compares the specified system variable with the specified
value using the specified relation. If the condition is met, the next line of
code is executed otherwise it is skipped.
Refer to the table of system variables that can be used for conditional
control.
Valid relations for the comparison are:
=
Equals
<>
Does not equal
>
Greater than
<
Less than
Properties
Immediate or buffered, can be used in labelled block, not saved by SV
Example
2IF(PA,>,450)
; if absolute controller position > 450 steps on axis 2
2O(1XX)
; set output 1
2IF(PA,>,500)
; if absolute controller position > 500 steps
2O(X1X)
; set output 2
Using inputs
2IF(IN,<>,1X00X)
; if input does not match the pattern
2O(XX1)
; set output 3
Note
If you wish to use the IF command during motion, command queuing (system
variable CQ) must be set for continuous execution (CQ=0).
Summary of Contents for ViX250CM
