![background image](http://html1.mh-extra.com/html/parker/vix250cm/vix250cm_user-manual_755859203.webp)
8. HARDWARE REFERENCE
195
8. Hardware Reference
Drive Specification – ViX250IM, ViX500IM
Functional Specification
Parameter
Value
Amplifier type
MOSFET chopper
User resolution
Freely programmable between 200 and
51,200 steps/rev
Nominal chopping frequency
16kHz
Protection circuits
Short circuit (phase-to-phase, across phases
and phase to ground), motor overcurrent,
over/under voltage, logic supply fault, over
temperature, ext. 24V reversed, encoder
fault
Maximum output current
ViX500: 5.6A rms (8A peak)
ViX250: 2.8A rms (4A peak)
Output current adjustment
Programmable from 0.1A to maximum rated
current
Standby current reduction
10% to 100% of programmed current
(software-selectable)
Motor HV supply input
ViX500: 48-80V DC +5% -15%
ViX250: 24-80V DC +5% -15%
Controller supply input
24V DC, 250mA (no outputs loaded, no
encoder fitted). Fieldbus expansion module
requires additional 50mA
LED status indicators (tri-colour)
HV fault, drive fault and comms status
Motor inductance range
0.5 - 10mH recommended
Table 8-1. Functional Specification
Summary of Contents for ViX250CM
