Parker
Hannifin
Important User Information
It is important that motion control equipment is installed and operated in such a way that
all applicable safety requirements are met. It is your responsibility as an installer to
ensure that you identify the relevant safety standards and comply with them; failure to do
so may result in damage to equipment and personal injury. In particular, you should
study the contents of this user guide carefully before installing or operating the
equipment.
The installation, setup, test, and maintenance procedures given in this guide should only
be carried out by competent personnel trained in the installation of electronic equipment.
Such personnel should be aware of the potential electrical and mechanical hazards
associated with mains-powered motion control equipment—please see the safety
warnings below. The individual or group having overall responsibility for this equipment
must ensure that operators are adequately trained.
Under no circumstances will the suppliers of the equipment be liable for any incidental,
consequential or special damages of any kind whatsoever, including but not limited to
lost profits arising from or in any way connected with the use of the equipment or this
guide.
Warning
— High-performance motion control equipment is capable of
producing rapid movement and very high forces. Unexpected motion may
occur especially during the development of controller programs. KEEP WELL
CLEAR of any machinery driven by stepper or servo motors. Never touch any
part of the equipment while it is in operation.
This product is sold as a motion control component to be installed in a
complete system using good engineering practice. Care must be taken to
ensure that the product is installed and used in a safe manner according to
local safety laws and regulations. In particular, the product must be positioned
such that no part is accessible while power may be applied.
This and other information from Parker Hannifin Corporation, its subsidiaries,
and authorized distributors provides product or system options for further
investigation by users having technical expertise. Before you select or use any
product or system, it is important that you analyze all aspects of your
application and review the information concerning the product in the current
product catalog. The user, through its own analysis and testing, is solely
responsible for making the final selection of the system and components and
assuring that all performance, safety, and warning requirements of the
application are met.
If the equipment is used in any manner that does not conform to the
instructions given in this user guide, then the protection provided by the
equipment may be impaired.
The information in this user guide, including any apparatus, methods, techniques, and
concepts described herein, are the proprietary property of Parker Hannifin or its
licensors, and may not be copied disclosed, or used for any purpose not expressly
authorized by the owner thereof.
Since Parker Hannifin constantly strives to improve all of its products, we reserve the
right to modify equipment and user guides without prior notice. No part of this user guide
may be reproduced in any form without the prior consent of Parker Hannifin.
2 ACR9000 Series Hardware Installation Guide
www.comoso.com
Summary of Contents for ACR9000
Page 1: ...www comoso com ...
